Levain: microbial flora, acidity, and dosage as a percentage
Understand what lives in your levain so you can manage it better: tracking pH, calculating pre-fermented flour, and timing your refreshes.
Table of contents(6 chapters)
Levain: yeasts and bacteria in the same environment
A bread levain is a mixture of flour and water in which yeasts and lactic acid bacteria, among others, live. The species and their proportions vary with the raw materials and with how the levain is maintained; no single flora is identical in every production kitchen.
- Yeasts produce carbon dioxide and ethanol, among other things. They contribute to the rise.
- Lactic acid bacteria produce acids. So-called homofermentative pathways mainly yield lactic acid; heterofermentative pathways also produce other compounds, including CO2, ethanol, or acetic acid, depending on the conditions.
The sensory profile depends on the acids and on many other compounds, and then on the flour and the baking. A bacteria-to-yeast ratio is not enough to predict the taste, volume, or digestibility of a bread.
The mother starter is used to maintain the culture. The final levain is the one prepared to be added to the mix, at the stage chosen in your method.
Tracking pH together with activity and consistency
pH tells you how acidic the medium is; total titratable acidity measures something else, using a titration protocol. The buffering capacity of the flour explains, in particular, why two levains with the same pH can contain different amounts of acid.
Instead of assigning a stage to each pH value, establish benchmarks from the levain that works in your production:
| When the reading is taken | What to record together |
|---|---|
| After a refresh | Proportions, temperature, initial pH, and starting volume |
| During ripening | Time elapsed, drop in pH, increase in volume, and consistency |
| At the chosen stage of use | pH, temperature, structure, smell, and behavior in a control dough |
For example, if your protocol gives the result you want at around pH 4.2, that value becomes a tracking benchmark for that protocol. It does not automatically validate another levain or another flour. A low pH together with unusual liquefaction suggests reviewing the ripening; pH alone does not measure leavening power.
Good to know
Use a probe suited to doughs and follow its maintenance and calibration requirements, in particular with the buffer solutions specified by the manufacturer. Keep the same method and record the measurement temperature so you can compare your readings.
Setting the levain dose and counting its flour and water
To compare doses, specify the weight of ripe levain, its hydration, and the flour basis. Here, all percentages are expressed relative to the total flour in the formula, including the flour in the levain.
Levain (%) = weight of levain added ÷ total flour × 100.
Pre-fermented flour (%) = flour contributed by the levain ÷ total flour × 100.
Two 200 g portions of levain do not necessarily contain the same amount of flour:
| For 1,000 g of total flour | Flour in 200 g of levain | Water in 200 g of levain | Pre-fermented flour |
|---|---|---|---|
| Levain at 100% hydration | 100 g | 100 g | 10% |
| Levain at 50% hydration | 133.3 g | 66.7 g | 13.3% |
In both cases, the weight of levain represents 20% of the total flour; the proportion of pre-fermented flour differs.
Example of a complete formula: for 1,000 g of total flour, 650 g of total water, and 20% pre-fermented flour, use 400 g of levain at 100% hydration. It contributes 200 g of flour and 200 g of water: you still need to add 800 g of flour and 450 g of water, then the salt and the other planned ingredients.
These calculations assume a levain made of flour and water. A dose alone does not determine three hours of fermentation or a level of acidity: maturity, hydration, temperature, and how the dough is managed also play a part.
In LogiBake, a levain recipe that is linked and filled in lets the Calculator count its flour and water in the baker’s percentages. The percentage on the levain line expresses its weight relative to the total flour; it is not the percentage of pre-fermented flour.
Explore recipe managementRefreshing: setting the proportions, then watching the ripening
A refresh adds flour and water to a quantity of mother starter. It renews the resources in the mixture and dilutes the acids already present. How long it takes depends in particular on the proportion of mother starter, its maturity, the hydration, and the temperature.
Always write out the order of the terms in a ratio. For example, 1:2:2 = mother starter : added flour : added water. With 100 g of mother starter at 100% hydration, 200 g of flour, and 200 g of water, you get 500 g of levain containing 250 g of flour and 250 g of water, still at 100% hydration.
The same ratio with a stiff mother starter does not give exactly the same final hydration. You therefore also need to count the flour and water in the mother starter, rather than describing the refresh by the additions alone.
- Weigh the planned mother starter, flour, and water, then measure the temperature of the mixture.
- Place a constant quantity in a suitable container and mark the starting level.
- Track volume, consistency, and acidification to determine the stage of use set by the schedule.
- Record the time observed and the result in the dough to confirm this rhythm over several batches.
A refresh is not necessarily ready after eight or twelve hours. Increasing the flour and water relative to the mother starter can lengthen ripening; a 1:3:3 ratio therefore does not guarantee renewed activity within four to six hours.
Temperature: a setting to combine with the others
Temperature influences the growth rate and the activity of microorganisms. It works together with the flour, the hydration, the proportion of mother starter, and the refresh schedule. A lactic or acetic profile cannot be deduced from a single temperature threshold.
| Process change | What to observe |
|---|---|
| Warmer ripening, within the process range | Speed of rise and acidification; stage of use sometimes reached earlier |
| Cooler ripening | Slowdown, time required, and changes in the sensory profile |
| Moving to refrigeration | Actual cooling time of the levain, residual activity, and conditions for recovery |
Cooler, longer regimes can steer the profile toward more acetic notes; they do not automatically select a microbial family below 18°C. The result must be confirmed on the levain in question.
To compare two temperatures, first keep the same flours, the same proportions, and the same hydration. Take the temperature of the levain itself: a large tub does not immediately reach the temperature of the unit it is stored in. Then adjust when you use it according to your observations, rather than always waiting until the same time.
Before use: cross-checking several signs of maturity
- History: check the time, the ratio of the last refresh, and the temperatures actually reached.
- Volume: observe the change from the starting level in a comparable container. The rise also depends on hydration and on the mixture’s ability to hold gas.
- Consistency: compare its structure and bubbles with those of your usual levain. Unusual liquefaction or collapse suggests reexamining the stage of ripeness.
- Smell and acidity: relate lactic, fruity, or acetic notes to your process, then add a pH reading if needed.
The float test mainly tells you about the gas held in the sample. It measures neither acidity nor leavening power in the recipe; it is not enough on its own to decide whether to use the levain.
If the planned stage has been passed, choose a new refresh suited to the condition of the mother starter and the production schedule, then monitor how it develops. A vinegar smell or separation cannot be diagnosed without the history. If there is mold or abnormal coloring, remove the levain from use and apply your hygiene procedure; a refresh is not enough to make a spoiled product usable.
Good to know
Record the time, proportions, temperature, pH if measured, and the result in production. The goal is to recognize your window of use through repeated readings, without promising stabilization in three days.
Starter in the dough · Sourdough refresh
Calculate the starter, flour, water and salt for your dough. Calculate the mother starter, flour and water for your refreshes.
Open the calculatorLogiBake does not replace your expertise.
It gives you the tools to make the most of it.